The preference dialog is used to customize the default behavior of QtiPlot. There are six pages of options which are selected using one of icons from the column on the left hand side of the dialog. The text box at the top of the dialog shows the name of the selected page. No matter which page is selected, there are always seven buttons along the bottom edge of the dialog: Help, Default Options, Save As, Load Settings, Apply, OK and Cancel.
Changes must be confirmed using either the Apply or OK buttons. The OK button additionally closes the dialog. Upon confirmation, changes are saved and stored immediately. The Cancel button will not undo changes which have already been confirmed but provides a means of exiting the dialog without confirming any changes that are pending. The Default Options button will reset the values of all the settings to the program defaults.
The Help button opens the quick help window corresponding to the selected page.
Finally, the Save As... button opens a file save dialog allowing to export the user settings to a .ini or .txt file. Starting with version 0.9.9.6 user settings are saved to a file called QtiPlot.ini that is stored into a hidden subfolder called .qtiplot in the user's home directory. Therefore you can customise QtiPlot on any computer, export the settings file and load it on another computer by pressing the Load Settings button or copy it manually to the .qtiplot subfolder of your home directory in order to get the same behaviour of QtiPlot.
Selecting the General icon displays the General options page. The controls that control the general options are grouped onto a set of seven tabs. Each tab references a set of related options.
Controls on the Application tab are used to set application wide defaults.
The Language combo-box lists the translations available in QtiPlot. Select a language from this list. Control names, program labels, etc., will be displayed in this language.
The Style combo-box defines the style used by QtiPlot for the window decorations. These include stylistic aspects of buttons, dialog boxes, window borders and titles, etc. Available styles are those currently available in the Qt library.
The Font chooser selects the font used in the GUI (menus, dialogs, etc). It doesn't apply to plots.
The Default Scripting Language combo-box is used to set the scripting language. muParser is the default. Python will also be available if Python support has been compiled into QtiPlot.
The Undo Stack Size is the number of operations that can be undone/redone. By default it is set to ten operations. A high value for this parameter can be very costly in terms of memory consumption, especially for large matrices.
The Endline character combo-box defines the end of line convention used by QtiPlot for copy/paste operations and for exporting matrices/tables to ASCII files. The end of line convention can be set to any one of the following: Line Feed (LF), Carriage Return + Line Feed (CRLF) or Carriage Return (CR) only.
The Start New Project combo-box is used to select what type of child window, if any, is created when a new project is started. The default is for new projects to contain an empty Table window.
The Import Excel files using option allows to specify the method used by QtiPlot when trying to import Excel files. Depending on the operating system QtiPlot provides four methods. The first one (the ExcelFormat library) can fail for certain files, therefore QtiPlot provides a second solution which needs LibreOffice installed on your computer. The third solution which uses OpenOffice is obsolete and users that employed it in older versions of QtiPlot are strongly encouraged to install LibreOffice since it is much faster (the path to the soffice executable must be correctly set in the File Locations tab). Finally, on Windows platforms, if you choose the option Locally installed Excel, QtiPlot uses Microsoft Excel as a server application in order to import the data sheets and also the plots.
The Clipboard Image Format option allows to specify the method used by QtiPlot when copying plot images to clipboard. When the first method (Bitmap) is chosen QtiPlot stores the plots as raster images, while the other methods use vectorial image formats: Enhanced Metafile (.emf), the default format on Windows platforms, Encapsulated Postscript (.eps), the default on Linux platforms and Scalable Vector Graphics (.svg).
The Preview box allows to customize the size of the preview image displayed in the project explorer when the user hovers the mouse over the name of a project window. This image is scaled to a rectangle preserving the aspect ratio of the window and having the shorter side equal to this value.
The Save Every check box is used to turn the auto-save feature on(checked) or off(unchecked). The associated textbox/spin button is used to set the autosave interval. The interval is in minutes. The textbox only accepts positive integer numeric input. All other input is ignored.
The Backup project before saving option is used to create a backup copy of the current project before saving a changed project file. This option is enabled when checked.
When checked, the Check for new versions at startup option will look for program updates on the internet each time the program is started. The default is disabled.
When checked, the Enable Autocompletion option enables the autocompletion feature of QtiPlot. Autocompletion is enabled by default in all QtiPlot editors (Notes, Script Windows, and values dialogs for matrices and tables). Completion suggestions are automatically popped-up for words that have more than two characters, but you can trigger autocompletion at any time using the shortcut Ctrl+U. Autocompletion can be disabled by unchecking the Enable autocompletion option.
When the option Enable window changelog is checked, the information displayed in the undo/redo stack is logged internally for each table or matrix window in the project and saved into the project file. This information can be viewed at any time by pressing the Changelog... button in the Window Properties dialog of each table/matrix window.
When checked, the Open last project at startup option enables the feature that reloads the last active project when QtiPlot is restarted. The default is enabled.
The General Preferences: Confirmations tab contains a set of 8 check boxes that enable/disable various warning prompts. The first six are warnings given when deleting project windows (Folders, Tables, Matrices, 2D Plots, 3D Plots, and Notes). The remaining 2 are warnings given when 1) renaming or appending windows with names that are already used in the current project, and, 2) when attempting to overwrite an existing file. All warnings are enabled by default.
In this tab, you can change the default color for the QtiPlot workspace, the panel background color and the panel text color. Panels refer specifically to the Log Window and the Project explorer.
The Numeric Format tab allows customizing several aspects of numeric formatting used by QtiPlot. The Number of Decimal Digits specifies the default precision used for any calculations applied to your data in Tables and Matrices. The Decimal Separators fields allow selection of the characters used as the decimal point and the thousands separator. By default, QtiPlot uses the locale settings detected on your system. Separate fields are provided for data in tables/matrices and data copied to the clipboard. The thousands separator can be eliminated completely from tables and matrices by checking the Omit Thousands Separator option. QtiPlot will convert all the existing data in your project to the new settings when you click the Apply button.
If the option muParser uses C locale settings is checked operations like setting column/matrix values or plotting function curves require that all the data input parameters are written using the standard convention for the C programming language: the decimal point is the dot character and the thousands separator is omited. Uncheck this option in order to use the numeric format settings specified above.
The File Locations tab allows you to define custom locations for the folders containing the translation files, the manual files and the Python configuration files (qtiplotrc.py and qtiUtil.py) if QtiPlot was built with Python scripting support. Default folder entries are also provided for scripts that are to be loaded at program startup.
The LaTeX Compiler and LaTeX Preamble fields are useful if you want to add TeX formated equations to 2D plots and you prefer to generate them using a compiler installed on your computer. The LaTeX Preamble field is optional, you may leave it blank.
In the LaTeX Compiler field you must provide the path to the LaTeX executable.
On Linux this path is set by default to
/usr/bin/latex. On Windows operating systems
you need to choose the location of the
latex.exe file. A very popular LaTeX compiler for Windows is MiKTeX.
On macOS you can use the LaTeX distribution provided by the MacPorts project.
In this case the path to the LaTeX executable is probably
The Keyboard tab makes possible to define custom shortcuts for all actions in the menus and toolbars of QtiPlot.
Settings on the Internet Connection tab are only needed if you connect to the internet via a proxy server. If you don't now how to set these options, contact your Network Administrator or other suitably knowledgeable person.
Selecting the Tables icon opens the second page of the preferences dialog which allows customizing default aspects of tables: background, text colors, and fonts for tables and labels.
The Alignment selection box can be used to define the default position of the text in the table cells: the text can be aligned with the left or right edge of the columns or centered horizontally in the available space.
If the Automatically Recalculate Column Values option is checked, all modifications in the values of a column trigger a recalculation of all columns with formulas depending on the modified column.
The controls in the Display group box can be used to select what information is visible in the the table header below the column names. Available options are the Long Names, the Units, the column Comments and the column formulas, F(x).
The Preview group box can be used to define the size of the picture that is displayed for each table column after a right click on the colum header. Unchecking this group box disables the display of the preview picture.
Via this tab you can select the quantities to be computed and displayed in the columns of the result tables generated by the Statistics -> Descriptive Statistics -> Statistics on Columns and Statistics -> Descriptive Statistics -> Statistics on Rows commands.
The following Moments can be computed by QtiPlot:
The number of valid values, Xi, in the dataset. Empty data cells are ignored.
The arithmetic mean of the dataset:
The standard deviation is defined as the square root of the variance:
The sum of all values in the dataset:
The skewness measures the asymmetry of the tails of a distribution. It is calculated using the following formula:
The kurtosis measures how sharply peaked a distribution is, relative to its width. It is normalized to zero for a Gaussian distribution:
Before computing the following Quantiles, QtiPlot sorts the input dataset in ascending order.
The first value in the sorted dataset.
The index number of the minimum value in the original (unsorted) dataset.
First (25%) quantile.
The median is the second (50%) quantile, Q2.
Third (75%) quantile.
The last value in the sorted dataset.
The index number of the maximum value in the original (unsorted) dataset.
The interquartile range is a measure of the statistical dispersion, being equal to the difference between the third and first quantiles: IQR = Q3 - Q1.
You can also define a list of custom percentiles. Only integer percentile values between 1 and 99 are accepted. They must be separated by a whitespace character.
Selecting the 2D Plots Icon opens the third page of the preferences dialog. This set of options is used to customize default aspects of 2D plots.
The Options tab may be used to customize the general behavior of the plot layers. Most of the changes made to these options will be applied only to newly created plots. Changing a few of these options, such as plot axis Autoscaling, scaling of fonts and the behavior on resize events will affect existant plots.
The controls in the Data Drawing Options group box can be used in order to set the default drawing options that can be modified later on for each plot layer via the Layer Display tab of the Plot Details dialog.
If the Margins box is checked QtiPlot automatically adds some amount of space before and after the data values along each axis scale. The effect of this option is mainly visible when creating new plots from table columns or when rescaling a plot layer so that all data on the graph is visible, using the Graph -> Rescale To Show All command.
The names of the other options in this group box should be self explaining.
The Curves tab contains a large number of controls that define the default style used when creating a new plot. The operation of these controls should be self evident.
The Error Bars tab contains the controls that define the default style used when adding error bars to a 2D plot curve.
The first panel in this tab allows to specify the dominant stylistic aspects of the plot axes like their Thickness, the visibility of the backbone line (with the help of the Draw backbones check box) and the space between the axes and their title and between the major ticks and their corresponding labels.
If you want that the axes intersect in the center of the plot layer you should check the Crossing axes layout box. With the help of the controls from this panel it is possible to precisely define the positions of the Horizontal and Vertical axes either in percentages of the plot canvas dimensions (width and height) or by specifying a custom scale value.
Using the controls in the Arrow group box it is possible to define a default end arrow shape for the Horizontal and Vertical axes only. The Left, Right, Bottom and Top axes cannot display arrows at their end point.
The Enabled axes panel controls which axes and more precisely which axes elements will be visible in a new plot layer. With the use of the Show check box it is possible to enable/disable a plot axis. The display of the major tick labels is controlled with the Labels check box. If you want to disable the display of an axis title you simply remove the text in the Title edit box.
The Ticks tab defines the default style for axis ticks drawn on newly created plots. The option Max Number can be used in order to set a limit for the number of major ticks that are displayed on each axis if the plot layer is rescaled automatically, for example after using the Rescale To Show All command.
The Grid tab defines the default aspect of plot layer grids.
The Geometry tab defines the default size for the drawing area of a plot layer and the margins around the layers. When the Keep aspect ratio option is checked, changing either the width or height will proportionally change the other dimension. Also, the aspect of the plot canvas (ratio between width and height) will remain unchanged for all future plot layers when you manually resize a graph window.
The Speed tab lets the user enable/disable antialiasing when drawing/redrawing 2D plots. Antialiasing is a major source of slow-down when rendering 2D plots. Unchecking the Antialiasing checkbox disables antialiasing for all curves, which probably will only be needed in extreme circumstances. Checking the Disable for curves with more than checkbox will disable antialiasing only for curves having data sets larger than the threshold set with the textbox to the right of the Disable for curves with more than checkbox. Disabling this option is probably not a good idea. The default is for both of these options to be enabled, with a threshold of 1000 data points. Proper setting of these options is essential to keeping the application responsive.
The option Disable mouse tracking for curves with more than ... data points can be used to stop detecting the position of the mouse pointer for curves with a very large number of data points. Data tools like the Data Reader command or the Select Data Range command will no longer work for the curves with more data points than the value defined for this option, but the application will be more responsive.
The Fonts tab defines the default fonts used when creating new plots. Options are provided for the plot Title, plot Legend, Axes Labels, and Axes Numbers.
The Print tab allows you to control a few default options that are used when printing 2D plots. If you want layers to be printed with their original dimensions, you must be sure to uncheck the Scale layers to paper size option. Checking the Print Cropmarks option ensures that some visible marks will be drawn around the borders of the plot.
Selecting the 3D Plots Icon opens the fourth page of the preferences dialog. This set of options is used to customize default aspects of three dimensional plots. Most of the options are self-explanatory. However, the Resolution option needs clarification. This option is more or less akin to a speed drawing mode, which can be very useful when working with large data sets. Larger values of the Resolution option result in fewer data points being drawn on 3D plots, and therefore a higher drawing speed. When Resolution is set to 1, all data points are drawn.
Selecting the Notes Icon opens the fifth page of the preferences dialog. This set of options is used to customize some of the default characteristics of the text editors, such as the length of the TAB character and the font. The user can also specify whether or not line numbers should be displayed. Displaying the line numbers can be particularly helpful when debugging Python scripts.
Selecting the Fitting Icon opens the sixth page of the preferences dialog. This page is used to set default fitting options. Most of the options are standard and straightforward.
The Generated Fit Curve options may be confusing at first glance. While it may be typical to plot a fit curve as y=f(x) using the original X data that was used in the fitting operation, QtiPlot provides the alternative (by selecting the Uniform X Function option) of plotting the curve using a user specified number of X data points (default=100) uniformly spaced over the X range of the fit. Since linear fits are completely defined by 2 points, you can also have QtiPlot default to simply plotting linear fits using 2 data points by checking the 2 points for linear fits option.
The options in the Curves group box can be used to specify if additional curves should be displayed after each fit operation. If the Conf. Bands and Pred. Bands options are checked QtiPlot generates confidence bands and prediction bands, based on the user defined value for the confidence level. If the Residuals Plot option is checked the curve of the fit residuals is also generated. The residuals are calculated as the difference between the experimental values and the response values predicted by the fit model.
The controls in the Parameters Output group box can be used in order to define the default options for the display of the results from data fit operations. The Format list box allows to choose a default numerical format. The value of the Significant Digits option can be used to customize the precision of the output and has a different meaning depending on the numeric format. The following format and precision options are available:
- Decimal or scientific e-notation, whichever is the most concise. The value of the Significant Digits control represents the maximum number of significant figures in the output (trailing zeroes are omitted).
- Decimal notation. The value of the Significant Digits control represents the number of digits after the decimal point.
- Scientific e-notation where the letter
e is used to represent "times ten raised to the power of" and is followed by the value of the exponent. The value of the Significant Digits control represents the number of digits after the decimal point.
The errors on the fit parameters are displayed in the log window only if the Error box from the Results Log group is checked. The Scale Errors with sqrt(Chi^2/doF) option only affects the errors on the parameters reported after the fit operation. It does not affect the fitting process or the data in any way. If checked, the reported errors on the parameters, εj, are calculated as the square root of the diagonal elements of the covariance matrix Cov(j, j) multiplied with sqrt(Chi2/(n - p)), where n is the number of data points and p the number of fit parameters. Otherwise, the reported errors equal the square root of the diagonal elements of the covariance matrix Cov(j, j).
If the LCL and UCL options from the Results Log group box are checked QtiPlot also displays the confidence limits for each fit parameter based on the value of the confidence level specified in the Curves box.
The controls in the Statistics group box can be used in order to define the default fit statistics to be displayed in the results log window after data fit operations. For more details about the meaning of these values, please visit the Data fiting section from the chapter dedicated to the Analysis of data and curves.
For all data analysis operations, not only fitting, there is a mechanism introduced in release 0.9.9.11 of QtiPlot that allows to trigger a recalculation when the data source is modified. It is possible to specify the desired recalculation mode using the Recalculate list box. The available options are:
- No recalculation when data changes.
- A recalculation is automatically performed when input data changes. This is the default option.
- No recalculation is triggered when data changes, instead the user can perform a recalculation at any time by pressing the Recalculate button from the Analysis tab of the plot details dialog.
Please note that if the recalculation mode is set to No the fit object is deleted from memory when the operation ends. In the other two cases the fit object is attached to the result plot curve and stored into the memory of the output graph window. The recalculation mode can be changed later on via the Analysis tab of the plot details dialog.
If the Apparent Fit option is checked, QtiPlot uses the apparent values for fitting, according to the current axis scales. For example, select this box to fit exponentially decaying data with a straight line fit when data are plotted on a log scale. When this check box is selected and the data has error values associated with it, QtiPlot uses the larger of the positive/negative errors as weight. Apparent Fit is only useful when you fit from a graph and change the plot axis type (from Linear to Log10, for example). If you check this option, QtiPlot will first transform raw data into new data space as specified in the graph axis type, and then fit the curve with the new data. Otherwise, QtiPlot always fits raw data directly, regardless of the axis type. Apparent fit is equivalent to direct fit if you first transform raw data on the worksheet, and leads to completely different results from direct fit if your graph axis is non-linear.